remote control CADILLAC DEVILLE 1998 7.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine Power Lumbar Control (If Equipped) Memory Seat and Mirrors (If Equipped)
The
LUMBAR control is
located on the outboard side
of each front seat. It
provides additional support
to your lower back and it
works independently of the
other seat controls. Use the
power seat control first to
get the proper position.
Then proceed with the
lumbar adjustment.
To reshape the lower seatback, move the LUMBAR
switch forward to increase support and rearward to
decrease support. Move the LUMBAR switch side to
side to raise or lower the support mechanism to suit
your preference.
Keep in mind that as your seating position changes, as it
may during long trips,
so should the position of your
lumbar support. Adjust the seat as needed.
If you have the optional personalization package, the
power lumbar control can be programmed for memory
recall. For more information, see “Programmable, Memory and Personalization Features” in the Index. Automatic seat and mirror movement will occur if the
Remote Keyless Entry
(RE) transmitter is used to
enter the vehicle. The number on the back of the
transmitter corresponds to the
1 or 2 seat and
mirror position.
After the unlock button is pressed on the
RKE
transmitter (the ignition must be in LOCK) or when the
key is placed in the ignition, the seat and mirrors will
automatically adjust to the appropriate position.
1-3

Downloaded from www.Manualslib.com manuals search engine Features and Controls
Here you can learn about the many standard and optional features on your ve\
hicle, and information on starting,
shifting
and braking. Also explained are the instrument panel and the warning systems that tell you if everything is
working properly
-- and what to do if you have a problem.
2-2
2-4
2-7
2- 10
2- 14 2-15
2-17
2- 18
2-18
2-20
2-2
1
2-23
2-26
2-28
2-3
1
2-3 1 Keys
Door Locks
Remote Keyless Entry (RKE) System
Trunk
Theft Theft-Deterrent System (If Equipped)
PASS-Key’II
New Vehicle “Break-In’’
Ignition Positions
Starting Your Engine
Engine Coolant Heater (If Equipped)
Automatic Transaxle Operation
Parking Brake Shifting Into PARK
(P)
Shifting Out of PARK (P)
Parking Over Things That Burn 2-32
2-32
2-33
2-34
2-35 2-42
2-46
2-48
2-54
2-56
2-56
2-5 8
2-59
2-62
2-67
2-79 Engine Exhaust
Running Your Engine While You’re Parked
Windows
Tilt Wheel
Turn SignaUMultifunction Lever
Exterior Lamps
Interior Lamps
Mirrors
Storage Compartments
Sun Visors
Cellular Telephone (Option)
Astroroof (Option)
Universal Transmitter (Option)
Instrument Panel
Warning Lights, Gages and Indicators Driver Information Center (DIC)

Downloaded from www.Manualslib.com manuals search engine Trunk Lock Release Trunk Storage System (Option)
To use this feature,
your vehicle must be in
PARK (P) and the valet
lockout button must be
off.
~ Press the trunk release
button, located on the
headlamp control panel on
the left side
of the
instrument panel, to open
the trunk.
You can also press the trunk button on the remote
keyless entry transmitter to access the trunk
compartment.
To disable the use of this feature, see
“Valet Lockout Button’’ in the Index.
If equipped, the trunk storage system can be used to
organize many different items inside the trunk. The
,
cover (A) is located on top of the spare tire cover (B).
2-11

Downloaded from www.Manualslib.com manuals search engine -
Exterior Lighting Battery Saver
If the manual parking lamp control has been left on, the
exterior lamps will
turn off approximately 10 minutes
after the ignition is turned to
LOCK or ACCESSORY.
This protects draining the battery in case yoihave
accidently left the headlamps or parking lamps on. If
you need to purposely leave the lamps on for more than
10 minutes with the ignition in LOCK or ACCESSORY,
turn the manual control knob off and then back on. To
delay the lahps from turning off, see "Twilight
Sentinel" earlier in this section.
Interior Lamps
Instrument Panel Brightness Control
Cluster lighting as well as instrument panel lighting
.automatically dims when it becomes dark outside and
your lights are on. When it's dark, the brightness control
can be manually adjusted by turning the lamp control
knob to the left to dimand
to the right to brighten the
lighting. Cluster lighting and instrument panel lighting automatically brighten when
it becomes light outside.
Courtesy Lamps (DeVille Only)
The courtesy lamps are located in the roof in the rear
seat. These lamps come
ofi with the lamp knob or when
any door is opened and it
is dark outside.
Illuminated Entry
The illuminated eptry system turns on the courtesy
lamps and the backlighting to, the 'door switches
and to
the lamp control
knob when a door is opened or if you
press
a remote keyless entry transmitter button. Since
the illuminated entry system has a photocell,
this means
that it must be dark outside
in order for the courtesy
lamps or backlighting to
turn on. The courtesy lamps
turn off approximately 20 seconds after the last door is
closed
or after the ignition key is placed in the ignition.
2-46

Downloaded from www.Manualslib.com manuals search engine Remote Recall Memory (If Equipped with
Memory Personalization)
Memory settings that have been previously programmed
(climate control settings, radio preset settings, exterior
lighting choices, lockhnlock confirmation choices and
programmable automatic door lock choices)
can be
recalled by using the remote keyless entry transmitter or
by placing the key in your vehicle’s ignition.
Before you begin programming, make sure that
your
vehicle’s ignition is in RUN. To begin programming,
press the INFORMATION
(INFO) and RESET (INFO
RESET) buttons at the same time for about two seconds.
As mentioned, remote recall memory is the third feature
to appear. To “skip” past the first two personalization
features, press the INFORMATION
(INFO) button.
When REMOTE RECALL MEMORY appears, the
driver is able to recall memory settings when the unlock
button on the remote keyless entry transmitter is
pressed. Press the TRIP SET (TRIP RESET) button to
select or press the RESET (INFO RESET) button to
answer no and to continue on to the next prompt.
FEATURE ON displays when a yes response is made. If
a no response was made, the
KEY IN RECALL
MEMORY prompt will show next. This choice recalls
memory settings when the key is placed in your
vehicle’s ignition. FEATURE ON displays for a yes
response and FEATURE
OFF for a no response. A yes
or no response is required.
Curb View Mirror (If Equipped with
Memory Personalization)
If your vehicle has this personalization feature,
MIRROR TILT
IN REV will be the fourth
personalization prompt to display on the Driver
Information Center (DIC).
To program your vehicle, press the INFORMATION
(INFO) and RESET (INFO RESET) buttons at the same
time for about two seconds. When MIRROR TILT
IN
REV appears, a “yes” or “no” response is needed. Press
the TRIP SET (TRIP RESET) button to answer yes or
the RESET
(INFO RESET) button to answer no.
FEATURE ON displays when a yes response is made
and FEATURE
OFF shows after a no response. If
you
do not want to change the setting of this feature,
press the INFORMATION (INFO) button to skip to
the next personalization feature which is Storage
Mode Personalization.

Downloaded from www.Manualslib.com manuals search engine Storage Mode Personalization
Before you begin programming, make sure that your vehicle’s ignition is
in RUN. To begin programming,
press the INFORMATION (INFO) and RESET (INFO
RESET) buttons at the same time for about two seconds.
The first message to appear
is DOORS LOCK IN
GEAR. Press the INFORMATION
(INFO) button after
this prompt is displayed until the STORAGE MODE
prompt appears on the Driver Information Center (DIC).
Press the TRIP (TRIP RESET) button to answer “yes” or press the RESET (INFO RESET) button to indicate a
“no” response.
FEATURE ON appears when a yes response is made
and FEATURE
OFF shows when a no response is made.
Since this is the last personalization feature available,
a
yes or no response will end out of the Driver
Information Center (DIC) display.
Once the battery guard has been programmed, your
vehicle will enter the storage mode about
20 minutes
after the ignition key has been turned off.
Your vehicle will stay in the storage mode until the
ignition key is turned out of LOCK. The system will
“wake-up” when the door key is inserted into the door,
however, your vehicle will remain in the storage mode.
The ignition must be out
of LOCK before the battery
guard is disabled.
Home and Away Feature
To program, hold two radio preset buttons at the same
time until
HOME PRESETS DRVR 1 ( DRVR 2)
appears on the Driver Information Center (DIC) display.
At this time, you are able to input your desired radio
stations. Holding the same
two radio preset buttons
again will display AWAY PRESETS DRVR
1 (or
DRVR
2). Radio stations that are out of your normal
operating range can be input at this time.
Climate Control Personalization
With this feature, your vehicle will recall the latest
climate control settings as adjusted the last time your
vehicle was operated. This feature allows two different
drivers to store and recall their own climate control
settings. The settings recalled by the climate control
system are determined by which remote keyless entry
transmitter
(“1” or “2”) was used to enter the vehicle.
The number on the back of the remote keyless entry
transmitter corresponds to driver
1 or to driver 2. After
the unlock button is pressed on the remote keyless entry
transmitter or the ignition key
is placed in the ignition,
the climate control settings will automatically adjust to
where they were last set. The settings can also be
changed by briefly pressing the memory seat buttons
1 or 2 located on the driver’s door.

Downloaded from www.Manualslib.com manuals search engine Radio Personalization
With this feature, your vehicle will recall the latest radio
settings as adjusted the last time your vehicle was
operated. This feature allows two different drivers to
store and recall their own radio settings for
AM and FM
presets, last tuned station, volume, tone and audio
source (radio, cassette or CD). The settings recalled by
the radio are determined by which remote keyless entry
transmitter
(“1” or “2”) was used to enter the vehicle.
The number on the back
of the remote keyless entry
transmitter corresponds to driver
1 or to driver 2. After
the unlock button is pressed on the remote keyless entry
transmitter and the ignition is in RUN, the radio settings
will automatically adjust to where they were last set by
the identified driver. The settings can also be changed by
briefly pressing the memory seat buttons
1 or 2 located
on the driver’s door. The new settings will be saved for
the driver.
Continual Variable -- Roac ing
Suspension (CV-RSS) (DeVille Concours Only)
The CV-RSS automatically adjusts the ride of your
vehicle. Automatic ride control is achieved through a
computer controller used to control and monitor the
suspension system. The computer controller receives
inputs from various sensors to determine the proper
system response.
If the computer controller detects a
problem within the system, the Driver Information
Center (DIC) will display a SERVICE RIDE
CONTROL message.
If this message appears, have
your vehicle serviced at your dealership.

Downloaded from www.Manualslib.com manuals search engine FAN SPEED: Press the up arrow lever to increase
the fan speed and the down arrow lever to decrease
I 1 fan meed.
Don’t use a razor blade or something else sharp
on the inside of the rear window. If you do, you
could cut or damage the warming grid or the
integrated rear window antenna, and the repairs wouldn’t be covered by your warranty.
L
TEMP: Press the up arrow lever to increase
the temperature and the down arrow lever to
decrease temperature.
Climate Control Personalization
I I (If Equipped)
HVAC Steering Wheel Controls
Some heating and cooling
controls can be adjusted at
the steering wheel. Other
touch controls operate some
audio controls. See “Audio
Steering Wheel Controls”
later in this section. With
this feature, your vehicle will recall the latest
climate control settings as adjusted the last time your
vehicle was operated. This feature allows two different
drivers to store and recall their own climate control
settings. The settings recalled by the climate control
system are determined by which remote keyless entry
transmitter
(“1” or “2”) was used to enter the vehicle.
The number on the back
of the remote keyless entry
transmitter corresponds
to driver 1 or to driver 2. After
the unlock button is pressed on the remote keyless entry
transmitter or the ignition key is placed
in the ignition
(the ignition must be turned to
LOCK), the climate
control settings will automatically adjust to where they
were last set. The settings can
also be changed by briefly
pressing the memory seat buttons
1 or 2 located on the
driver’s
door.
3-13

Downloaded from www.Manualslib.com manuals search engine Rear Compartment Fuse Block
The fuse block is located on the front wall of the trunk
(behind the rear seat) on the driver’s side. Loosen the
four trunk trim fasteners and ~ull the trim away from the
fuse block to gain access.
Fuse
RSS
IGN O-BODY
RLY IGN 1 ~O~~~U~
~~n~nn~ IGN 0-BODY COMFORT
HTD BACKLT HTD MIR
HTD SEAT R HTD SEAT L PULL DOWN
ANTENNA CONVENC RT PARK LT PARK
RADIOPHONE CLUSTER
COMFORT
Fuse
RLY IGNl*
SIR
ELC
TURN
CONSOLE
Usage
Cluster, Cruise in Stalk, PZM,
TCC Switches
SDM
Electronic Level Control (ELC) Relay, ELC Sensor (DeVille
Only), ELC Compressor
Electronic Flasher,
Turn/Hazard Switch
Headlamp Wash Relay, Rear
Zone Blower, Right and Left
Heated Seat Switches (Optional)
Usage
Road Sensing Suspension (RSS) (DeVille Concours Only)
PRNDL, Heated Windshield
Module (Optional), PZM,
Cluster, Air Control Module (ACM), Upper Zone Motor,
Lower Zone Motor (Optional), HVAC Solenoids, Climate
Control Panel
Analog Cluster
(Console Shift Only), Rear Defog
Relay, ELC Relay
CD Player, Remote Keyless
Entry (RKE), Controlled Power Relay, Air Control Module
(ACM), PZM
AMP (Bose Only) Active Audio Amplifier (Optional)
PZM PZM
RADIOPHONE Radio Receiver, Radio Interface
Module (RIM) (Bose Only),
Phone,
DAB Relay, Trunk
Release Relay, Fuel Door Release Relay, High/Low Beam Relay
Steering Wheel Controls, Cluster
CLUSTER

Downloaded from www.Manualslib.com manuals search engine Battery ...................................... 6.3 1
Jump Starting
................................. 5-3
Not Charging Message
......................... 2-82
Volts High Message
........................... 2-83
Volts Low Message
........................... 2-83
Warnings
................................ 5-3. 5-5
Battery Saver ............................. 2-46. 2-48
Exterior Lighting
............................. 2-46
Inadvertent Power
............................ 2-48
BBB Auto Line
................................ 7- 11
Better Business Bureau Mediation
.................. 7- 11
Blizzard
...................................... 4-27
Brake Replacement. Remote Keyless Entry
............... 2-9
Adjustment
.................................. 6-30
Fluid
....................................... 6-28
Master Cylinder
.............................. 6-28
Parking ..................................... 2-26
PedalTravel
................................. 6-30
Replacing System Parts
........................ 6-3 1
System Warning Light
......................... 2-69
Trailer
...................................... 4-35
Transaxle Shift Interlock
....................... 2-31
Wear
....................................... 6-30
Brake Vacuum Problem Message
.................. 2-83
Brakes. Anti-Lock
............................... 4-7
Braking ........................................ 4-6
Braking in Emergencies .......................... 4- 10
Break-In. New Vehicle .......................... 2-18 Brightness Control
.............................. 2-46
Bulb Replacement
.............................. 6-32
BTSI
......................................... 2-31
Capacities and Specifications
.................... 6-66
Carbon Monoxide
.................... 2.32.4.28. 4.35
Cassette Tape Player
.................. 3.16.3.19. 3.28
Cassette Tape Player Care
........................ 3-39
Cellular Telephone
.............................. 2-56
Center Console Storage Area
...................... 2-54
Center Passenger Position
........................ 1-29
Central Door Unlocking System
.................... 2-5
Chains. Safety
................................. 4-35
Change Engine Oil Message
...................... 2-83
Change Trans Fluid Message
...................... 2-83
Changing a Flat Tire
............................. 5-24
Charging System Indicator Light
................... 2-69
Check Brake Fluid Level Message
................. 2-83
Check Coolant Level Message
..................... 2-84
Check Fuel Gage Message
........................ 2-84
Check Gas Cap Message
......................... 2-84
Check Oil Level Message
........................ 2-84
Check Washer Fluid Message
..................... 2-84
Checking Your Restraint Systems
.................. 1-53
Chemical Paint Spotting
.......................... 6-55
Cassette Tape Player Errors
............. 3.16.3.20.
3-28
Center High-Mounted Stoplamp Bulb Replacement
.... 6-35
Certification Label
.............................. 4-30
Chains. Tire
................................... 6-48
8-2